We are now taking booking for Winter 2019-2020 Warehouse Temperature Mapping!

Meteorological Winter Starts 1 December and will end on 28 February and It is important to ensure your winter mapping is performed during this window.

We are pleased to introduce our new system for sensor placement, which allows our engineers to place sensors upto 6m high without the need for a mobile work platform. Significantly reducing  timelines and reducing health and safety concerns.

Introducing Validation equipment into a cleanroom environment has always been a challenge. Bulky Kaye Validators, Calibration Baths and Thermocouples are difficult to clean with IPA and Biocide. Improperly cleaned items can be a potential route for contamination.

By using Ellab Tracksense Pro wireless dataloggers equipment can be cleaned easily. Reducing downtime and risk of contamination. The dataloggers are IP67 rated so can be fully immersed in liquid and cleaned effectively. Sensors can also be calibrated an pre programmed prior to cleaning into the room, reducing the volume of test equipment to be cleaned.

Would you like to know more about wireless dataloggers and why we use them?

Our Managing Director Chris Maughan has written an article for Cleanroom Technology magazine entitled 'A Guide to Wireless Dataloggers for Thermal Validation. In the Article Chris describes benefits and limitations of using wireless dataloggers for Thermal Validation.

At Thermal Compliance we use many different systems for validation from Kaye Validator 2000's, Vaisala Veriteqs and Ellab Tracksense Pro X Dataloggers. We ensure our clients have the most accurate, suitable and flexible equipment.

Wireless datalogger help us to reduce validation times lines by up to 50%. They also help to increase accuracy and reduce review timelines. If you would like to know more about the different systems we use please take a look at our dataloggers page. For more information about our Thermal Validation service please look at our Temperature Mapping page.

​If you need to perform Temperature Mapping and Thermal Validation within a potentially Explosive environment, we can help.

For ATEX environments, we use Ellab Tracksense Pro X dataloggers. These sensors have a permitted range of -60 to 105°C within an ATEX Environment. Tracksense Pro X loggers have been certified to ATEX IEC 80079-34.

Our Temperature Mapping page has more information on how we can help with your ATEX Mapping requirements.​

​Every year we perform mapping on hundreds of Controlled Temperature Units across Europe. The easiest option for us would be to use a simple template to perform the mapping. Which is why our customers are often surprised when we tell them we don’t use templates. All of our protocols are bespoke to each of our clients.​

​We are exhibiting at the PDA Ireland's 'Practical Implementation of QRM - Are We Getting Value?' event in Cork today. If you're attending please stop by and say hello.

The event is exploring the integration of QRM into the PQS & whether by demonstrating effectiveness we may achieve operational advantage & regulatory relief.

Presenters include Kevin O'Donnell from the HPRA, guest speakers from Deloitte Life Sciences and Industry.
​
Panel Discussions, workshops and networking opportunities will allow for full exploration of topic.

Calibration is an integral part of thermal validation and should be optimised for the process and sensors being used.
​
To ensure optimal calibration of our sensors we use a variety of calibration baths, RTDs and Bath Inserts to ensure the optimal performance of the sensors.
​

·       Ametek Jofra RTC-159
   o   Temperature Range -100 to 155°C
   o   Accuracy to ± 0.04°C
   o   Stability to ± 0.005°C

·       Kaye LTR-140
   o   Temperature Range -40 to 140°c
   o   Setpoint Accuracy 0.2°C
   o   Stability 0.02°C
​